Health and Safety Information

Our kits are made primarily from laser-cut MDF, polyurethane resins, and high impact polystyrene (HIPS). They are Phthalate and Mercury free.

While we do our best to ensure that our kits reach you in fine order. Sometimes you will need to file or trim some sections in order to get a good fit. Avoid inhaling small particles by working in a well-ventilated area and wearing a dust mask when sanding or filing parts.

Our kits are made primarily from laser-cut MDF, polyurethane resins, and high impact polystyrene (HIPS). They are Phthalate and Mercury free.

While we do our best to ensure that our kits reach you in fine order. Sometimes you will need to file or trim some sections in order to get a good fit. Avoid inhaling small particles by working in a well-ventilated area and wearing a dust mask when sanding or filing parts.

The use of glue is recommended but not required. Many of our kits will hold together on their own under gentle care. We recommend using white glue if you’re a patient, and superglue if you are not.